The filter separator performs a two-stage purification of gas from mechanical impurities with an efficiency of at least 99% and ensures the separation of liquid fractions and mechanical impurities from the gas with condensate discharge through a drainage pipe.The filter separator is suitable for both indoor and outdoor applications and is suitable for the preparation of fuel gas for gas pumping units and gas turbine power plants.

Gas filtration is designed to purify gas from mechanical impurities and droplet moisture.
Gas treatment units are used for gas purification, preheating before subsequent reduction at automated gas distribution stations, fuel and starting gas preparation points, as well as as part of other gas industry facilities.

Miniature, insulated, pinch, pulse, hydraulic, actuating and proportional valves are available for a variety of applications.

Drives, cylinders and accessories to optimize the application and minimize replacement costs.

Pneumatic valve control technology, Fieldbus valve blocks and regulators, compact enough for most workspaces.

Air treatment equipment includes filters, regulators and lubricators in a wide range of high-cost, modular solutions.

Controllers and valves with advanced electronics for maximum energy efficiency and performance.

The compact, inexpensive MAXIMATOR high-pressure pumps are powered by air or noble gas pressure from 1 to 10 bar. There are many potential applications of MAXIMATOR pumps in mechanical engineering, the oil and gas industry, the chemical and pharmaceutical industries, the defense, mining and construction industries, as well as in aviation and aeronautics.

The Maximator LGP (Liquified Gas Pump) series has been developed for use with refrigerants. The design of these pumps is based on the principle of operation of gas compressors combined with proven high-pressure pump technology.

MAXIMATOR PLV series air amplifiers are suitable for compressed air or nitrogen compression. The devices are capable of increasing the normal pressure of 4 bar or 6 bar to the desired end pressure. PLV air amplifiers work with ordinary shop air and are equipped with various gain factors.

MAXIMATOR high-pressure boosters are suitable for oil-free compression of gases and air. Industrial gases such as argon, helium, hydrogen, and nitrogen can be compressed to an operating pressure of 2,100 bar (30,000 psi inch), oxygen up to 350 bar (5,075 psi inches).

MAXIMATOR valves, fittings and tubes are suitable for various media and operating pressures up to 10,500 bar.

The ROB series is designed for users who need to compress oxygen up to 300 bar in the simplest and most efficient way. Professional divers use the ROB series boosters to fill oxygen tanks or mix gases for technical diving, and fire and emergency stations are committed to the quality of these compact boosters.

The sprinkler unit measuring 700x650 mm ( + - 50 mm) of increased mechanical strength, with high cooling efficiency, is made on a welding machine from corrugated tubes with a diameter of 48 mm. The cooling efficiency is 7-8 degrees from one tier. When installing sprinklers in two tiers, the cooling efficiency is 12-13 degrees. Our polymer sprinkler blocks are able to take the hydraulic load on the fan cooling towers according to the project of 7200 cubic meters/ hour, actually took 12300 cubic meters / hour, which is 71% more than the design capacity. In tower-type cooling towers, the flow rate of circulating water on an area of 1,200 m2 was 27,000 cubic meters per hour. The product has a service life of at least 20 years.